Unstable approach — EMD305
KABQ · 032026-07-22 11:26 UTC· KABQ → KABQ· EAGLEMED LLC· BE20
EMD305 (Eaglemed) was operating from KABQ to KABQ on 2026-07-22. SkyMeter detected a low approach-stability score at Albuquerque International Sunport (KABQ) on runway 03 at 11:26 UTC. Trace data at the event: 6423 ft AGL, 159 kt GS. METAR at the time reported 6 kt wind, 5 kt crosswind component, 16,093 m visibility. The approach-stability score rates the final approach against stabilized-approach gates (glideslope, lateral deviation, descent rate, and IAS) at defined altitudes. A low score means one or more of those were outside the normal envelope for how the approach was flown. The score is graded by guidance type, so instrument approaches (ILS or an aligned straight-in) are held to the full gate set, while visual and pattern arrivals are surfaced only when the score is clearly low. The score is advisory and observational, a deviation measure, not an assertion of an accident. Detection algorithm and known limitations: see SkyMeter methodology.
Pilot review data
- Runway 03
- 6423 ft AGL at event
- 159 kt ground speed
- 0 fpm vertical
- 6 kt wind
- 5 kt crosswind component
- 16,093 m visibility
- KABQ 162252Z 13015G21KT 10SM SCT110 BKN250 33/08 A3021 RMK AO2 SLP133 OCNL LTGIC DSNT NE AND SE CB DSNT NE AND SE SHRA DSNT SE T03330078 $
Flight context
- EMD305
- Eaglemed
- BE20
- KABQ → KABQ
- 2026-07-22 11:26 UTC
- KABQ runway 03
All events on this flight
Automated analysis. Events shown on this page (such as go-around, unstable approach, or runway events) are heuristic classifications produced by algorithms from publicly broadcast ADS-B data. They are intended to surface flights of interest for further review — they are not findings of fact, and they do not determine pilot fault, regulatory compliance, or the cause of any occurrence. Coverage gaps and sensor noise can affect accuracy. Only the relevant civil aviation authority or accident investigation body can make official determinations. How we detect events · Dispute or correct this data